![]() ![]() Remember that you can press “Up” on the remote while looking at the pattern to bring up a help screen. Once you know which level of filter is appropriate for your display, use the instructions given for the Color and Tint pattern to set your Color and Tint (or Saturation and Hue) controls. If the red, green, and yellow bars are still barely visible through the 3X filter, continue with the calibration you should be able to get close to the correct levels.The 3X filter is very dark, so you will need to be in a dark room with your eyes completely adjusted to the light to use it. If you have a Blu-ray player and the Spears & Munsil HD Benchmark, you can properly adjust the brightness, contrast, color, tint, sharpness, and. If the bars still are not black, fold the filter at the score in the center and look through both sides to form a 3X filter.If they are not black, but slightly red or green, or look a little brighter than the black background, then switch to the 2X side.The large red, green, and yellow bars on the left should turn black, and should be indistinguishable from black area around them. Look through the 1X side of the filter.Put up the Color and Tint pattern. (Video Calibration->Color And Tint).Different displays need different levels of filtering to do a proper calibration, so the filter allows for 1, 2, or 3X filtering. ![]() The Spears & Munsil Calibration Filter is used with the Color and Tint pattern to set the Color and Tint controls (sometimes called “Saturation” and “Hue”) on your display. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |